• TALESUN SMART
    Module Characteristils
    1.Integrate with module optimizer from Tigo Energy .
    2.Robust design: Certified to withstand up to 2400 Pawind load and up to 5400 Pa snow load.
  • PID ZERO
    Module Characteristils
    1.More reliable than ordinary modules.
    2.Robust design: Certified to withstand up to 2400 Pawind load and up to 5400 Pa snow load.
  • Hipro M345+
    Module Characteristils
    1.Higher power output: With passivated backside and BSF technology.
    2.Robust design: Certified to withstand up to 2400 Pawind load and up to 5400 Pa snow load .
  • Hipro M290+
    Module Characteristils
    1.Higher power output: With passivated backside and BSF technology.
    2.Robust design: Certified to withstand up to 2400 Pawind load and up to 5400 Pa snow load.
  • FEATHER 2.0
    Module Characteristils
    1.2 mm thin front glass and 30 mm thin frame.
    2.Robust design: Certified to withstand up to 2400 Pawind load and up to 5400 Pa snow load.
  • TWINKLE
    Module Characteristils
    1.Excellent corrosion resist, build to last in the harsh environment such as desert,seaside and water front。
    2.Robust design: Certified to withstand up to 2400 Pawind load and up to 5400 Pa snow load.
  • TP648M
    Module Characteristils
    1.Positive power tolerance: 0-+3%.
    2.Robust design: Certified to withstand up to 2400 Pa
    3.More suitable and adaptable for rooftop projects.
    4.Black frame and black back sheet.
  • TP672P
    Module Characteristils
    1.Positive Only Power Tolerance:0-+3%
    2.High Mechanical Load Strength:Product to Withstand High Wind Loads (2400Pa) and High Snow Loade (5400Pa) in Accordance with IEC 61215
  • TP660M
    Module Characteristils
    1.Positive Only Power Tolerance:0-+3%
    2.High Mechanical Load Strength:Product to Withstand High Wind Loads (2400Pa) and High Snow Loade (5400Pa) in Accordance with IEC 61215
  • TP660P
    Module Characteristils
    1.Positive Only Power Tolerance:0-+3%
    2.High Mechanical Load Strength:Product to Withstand High Wind Loads (2400Pa) and High Snow Loade (5400Pa) in Accordance with IEC 61215
  • TP672M
    Module Characteristils
    1.Positive Only Power Tolerance:0-+3%
    2.High Mechanical Load Strength:Product to Withstand High Wind Loads (2400Pa) and High Snow Loade (5400Pa) in Accordance with IEC 61215
  • Specification of M156-4BB Solar Cell
    Product benefits
    1.Highly reliable energy output due to longevity and 100 % hot spot prevention
    2.Maximum yield due to outstanding low-light behavior
    3.Prevention of power loss on module level through precise cell efficiency sorting
  • Specification of P156 -3BB Solar Cell
    Product benefits
    1.Highly reliable energy output due to longevity and 100 % hot spot prevention
    2.Maximum yield due to outstanding low-light behavior
    3.Prevention of power loss on module level through precise cell efficiency sorting
  • Specification of P156 -4BB Solar Cell
    Product benefits
    1.Highly reliable energy output due to longevity and 100 % hot spot prevention
    2.Maximum yield due to outstanding low-light behavior
    3.Prevention of power loss on module level through precise cell efficiency sorting
  • The 24MW Ground-mounted Photovoltaic Power Project in San Floro, Calabria, Italy
    The total installed capacity of this 24MW. This project was connected to the grid on May 17, 2012. It is invested by Talesun Solar Hongkong Limited, wholly-owned by Zhongli Talesun Solar Co., Ltd. The project covers an area of approximately 390,000 square
  • Introduction of China Power Investment Corporation Project
    Asia’s Largest Distributed Roof Solar Power Station Changshu China Power Investment Corporation 9.8MW solar power roof project
  • Introduction of Xuzhou’s Project
    The world’s largest individual ecological agriculture solar power station roof project
  • Stand- Alone Photovoltaic System
    Solar modules transfer solar energy to electric energy, which is stored into the storage battery via the controller. The controller then distributes the electric energy to individual load. The system can supply electricity to DC load directly, and to AC l
  • Grid-Connected Photovoltaic (PV) System
    Photovoltaic Grid-Connected Generation Principle: Solar modules form the solar array through a series-parallel connection, and the solar array converts solar energy into direct current electric energy. The direct current then goes through a DC distributio
  • 100MW Photovoltaic Power Plant ---Jiayuguan, Gansu
    The installed capacity of this project is expected to be 100.298MWp. Compared to traditional coal-fired power plant, it can generate 143.72 million kilowatt-hours annually. According to the average coal consumption 335g/kWh of a coal-fired power plant, th
  • 100MW Photovoltaic Power Plant ---Geermu, Qinghai
    The installed capacity of this project is expected to be 100.298MWp. Compared to traditional coal-fired power plant, it can generate 143.35 million kilowatt-hours annually. According to the average coal consumption 335g/kWh of a coal-fired power plant, th
News Release  
Service Philosophy  
We adhere faithfully to brand building, integrity in sales and the ideal of “customer first”. And we keep in technical innovating and go all out to provide our clients with high efficient photovoltaic products and more stable and more economical PV syste
Human Resources  
Potential Supervisor of Production; Shift Supervisor of Production; Process Engineer of Module; Price Engineer; Equipment Engineer of Module; Electrical Engineer of PV system.
Technology And Quality  
Based on the solar cell and module manufacture, the R&D team of Talesun optimize the manufacturing technique, improve the solar cell efficiency, and reduce the production costs.
Related Links
© 2011 Talesun Solar Germany GmbH  |  Created by medialink
Imprint  |  Disclaimer
|   Contact Us  |